Please ensure Javascript is enabled for purposes of website accessibility

Wireless Suction Cup Mount for SpeedCoach® GPS or Speedcoach SUP

$15.00
Adjustable angle suction cup mount for all SpeedCoach®, SpeedCoach® XL, and StrokeCoach® units.
Availability: In stock
SKU
0155
  • Adjustable angle, suction cup mount for all SpeedCoach, SpeedCoach XL, and StrokeCoach units.
  • Powerful suction cup, no drilling required.
  • Adjustable angle allows for more placement options.
  • Large, high grip adjustment screw is easy to use with cold, wet hands. 
  • Fits Go-Pro Cameras.

Includes:

  • Suction Cup Mount.
  • 2 alcohol wipes for surface prep.

NOTE: PLEASE MOUNT YOUR SPEEDCOACH WITH A BUMPER. 

Mounting Instructions

Suction Cup Surface Mount Installation

SpeedCoach SUP & GPS

For the best mounting results, you should choose a spot on your paddle board approximately 2 to 3 feet ahead of where you would stand on the board. You will want to choose a spot where the mounting suction cup is flush to the deck. You will also want to ensure that he SpeedCoach will be clear of your paddle blade when switching hands and does not force you to look DOWN and alter you paddling form.

After choosing a mounting location, clean this location with the provided alcohol swabs to remove all dirt and debris from the board. Allow a minimum of 5 minutes for the alcohol to evaporate from the board. Unclip the mounting suction from the SpeedCoach bracket. Press down and hold the mounting suction cup in the chosen mounting location for at least 30 seconds.

IMPORTANT! Attach the NK foam float to your SpeedCoach in your preferred way. You may use the provided keychain, running it under the lanyard bar on the side AWAY FROM the battery contacts. Or, you may pass a loop of the lanyard through the float hole and double back.

Specifications
Unit Weight.25 lbs

Visit our support page for FAQ and more.