Knowledge Base

Tag : speed reading

First of all, you will not get these readings unless you have the impeller installed in your boat. While your SpeedCoach can execute other functions without the impeller, it is essential that the impeller be installed for split readings.

If you do have this problem with an installed impeller, you need to make sure that the impeller is installed close enough to the blue sensor. The impeller must be mounted within 10” of the blue sensor. See SPC installation instructions for more information.

... Read more

You have an incorrect calibration number and must reset the calibration of your unit. See unit instructions for more information.

... Read more
  1. This is probably a problem with your SeatSwitch (the black sensor). You should test your seat sensor by placing the unit in 0-STROKE mode to check if the unit is functioning correctly. If all readings are correct in 0-STROKE mode, the problem is either the SeatSwitch or the magnet (this test will NOT work for kayakers).
  2. You should check the installation of both your SeatSwitch and magnet. See SPC installation instructions for more information.
    1. ... Read more